Managing Fire Hazards on Site

Construction sites, especially those in a transitional phase, introduce specific fire hazards due to frequent layout changes, relocatable equipment, and divided workforces. A sound alerting system is necessary for ensuring all personnel are aware without delay. The Howler range, including the GOLink system, HO units, and site alert models, provides a scalable safety setup to match various site demands.

What Exactly Are HO Alarms?

HO alarms are independent, battery-operated devices used where hard-wired installations are impractical. Ideal for moveable cabins or outbuildings, they require no wiring.

• Loud alarm: Around 102 dB at a metre’s distance.


• Optional strobe: Some models include integrated lights for visibility.


• IP-rated: Many are suited for outdoor use or partially exposed areas.

These alarms provide supplementary coverage where the core alert network may not reach.

The Site-Wide Alert Range

Suitable for mid-sized projects, the Site Alert system can work as standalone or in linked setups of up to 20 units using a simple two-core cable. When set off, all devices in the series respond simultaneously.

• Approx. 100 dB sound level at 1 metre


• Built-in visual LED for loud or noisy settings


• Recommended where cabling is straightforward

Site Alert RF (Radio-Frequency)

Where cable routes aren't possible, Site Alert RF links up to 30 units over wireless. It has an line-of-sight range of around 1 km and supports multiple channels for interference avoidance.

Blending wireless and cabled systems is frequently the best strategy for sites with varying structures.

Integrating the GOLink System

The GOLink system acts as a communication core for large, website multi-zone installations, using wireless signals to connect multiple devices.

Connecting to Site Systems

Through the Interface Unit, it’s possible to tie into turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can interact across a site-wide network.

First Aid Callouts

Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid signal quietly sends a location-specific assistance request, allowing medical needs to be flagged without general evacuation.

Deployment Guidelines

• Zone assessment: Identify where alarms need to be heard or seen, dividing the site into manageable sectors.


• Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.


• Set a maintenance routine: Schedule regular testing and check battery levels.


• Training & signage: Ensure instructions are posted and team members know how to respond to alerts.

FAQs

Wired capacity?

Up to 20 Site Alert units can be connected using 2-core cable.

How far does the wireless version reach?

Approx. 1 km in open-air conditions, though physical obstructions can reduce range.

Do HO alarms need a base station?

No, HO models are self-sufficient and do not require central control.

Is third-party integration supported?

Yes, external systems can be connected via the GOLink Interface Unit.

Why use an alarmed switch cover?

It reduces false alarms by sounding a warning if tampered with before activation.

Can both cabled and RF alarms work together?

Yes, the GOLink system allows wired and wireless units to operate on the same network.

Does first aid signal cause evacuation?

No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.

Final Notes

Whether your project involves one zone or several, Howler alarms—HO, GOLink, and Site Alert—deliver protection that adapt to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.